Speed Washer Extractors
Tupesa has developed a new and complete range of SPEED open-pocket single-shaft drum centrifuges for ready-made garments that allow both the washing and spinning functionality
Its advanced design and technology, as well as a wide variety of options and accessories, allow a significant impact on energy efficiency and saving water and chemicals, reducing production costs and thus increasing business performance. To give solution to the demand of big loads with a range that includes the models 220, 330 and 400 Kg. / 485,730 and 880 Lb.
Washers of high centrifugation without need of anchors, "floating system".
• Made of stainless steel AISI-304.
• Galvanized steel chassis.
• Programmer for automatic processes.
• Automatic balancing of the machine.
• The drum is located horizontally and door for front loading and unloading.
• Variable speed of rotation with automatic reversal of the direction of rotation.
• Direct steam heating and complete pneumatic valves.
• Tilt forward and back to facilitate loading and unloading.
Its advanced design and technology, as well as a wide variety of options and accessories, allow a significant impact on energy efficiency and saving water and chemicals, reducing production costs and thus increasing business performance. To give solution to the demand of big loads with a range that includes the models 220, 330 and 400 Kg. / 485,730 and 880 Lb.
Washers of high centrifugation without need of anchors, "floating system".
• Made of stainless steel AISI-304.
• Galvanized steel chassis.
• Programmer for automatic processes.
• Automatic balancing of the machine.
• The drum is located horizontally and door for front loading and unloading.
• Variable speed of rotation with automatic reversal of the direction of rotation.
• Direct steam heating and complete pneumatic valves.
• Tilt forward and back to facilitate loading and unloading.
Additional water inlet.
Acquasoft system: Heat exchanger, circulation pump, filter and modulant valves for bath heating and cooling, 4 tanks of 45 l / 12 gal in stainless steel.
Set of 1 tank in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Set of 2 tanks in stainless steel of 45 lt / 12gal gal with introduction pump and complete pneumatic valves.
Set of 3 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Set of 4 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Temperature, time and liters control kit in manual mode.
Steam chamber for indirect heating.
Acquasoft system: Heat exchanger, circulation pump, filter and modulant valves for bath heating and cooling, 4 tanks of 45 l / 12 gal in stainless steel.
Set of 1 tank in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Set of 2 tanks in stainless steel of 45 lt / 12gal gal with introduction pump and complete pneumatic valves.
Set of 3 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Set of 4 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Temperature, time and liters control kit in manual mode.
Steam chamber for indirect heating.
Speed 150 | Speed 220 | Speed 400 |
Speed 500 |
||
---|---|---|---|---|---|
Capacity | kg | 150 |
220 |
365 |
460 |
Drum Diameter | mm | 1.500 | 1.500 |
1.800 |
1.800 |
Drum Depth | mm | 920 |
1.220 |
1.424 |
1.800 |
Drum Plate Thickness | mm | 3 |
3 |
3 |
3 |
Drum Volume | lit | 1.620 |
2.150 |
3.650 |
4.850 |
Water Inlet | in |
2" |
2" |
2" |
2" |
Steam Inlet | in |
3/4" | 3/4" |
1 1/4" |
1 1/4" |
Air Inlet | in |
1/4" |
1/4" |
1/4" |
1/4" |
Drain | mm | 150 | 150 | 150 |
150 |
Wash Velocity | rpm | 4-50 | 4-50 | 4-50 | 4-50 |
Centrifuge Speed | rpm | 4-550 | 4-550 | 4-550 | 4-550 |
Motor Power | Kw | 27.6 |
27.6 |
50 |
50 |
Motor Power | Hp | 37 |
37 |
70 |
70 |
Weight | kg | 7.000 |
7.500 |
10.600 |
12.700 |
G Factor | G | 253 | 270 |
321 |
321 |
Speed 150 | Speed 220 |
Speed 400 |
Speed 500 |
||
---|---|---|---|---|---|
Height (A) | mm | 2.460 |
2.460 |
2.460 |
2.460 |
Depth (B) | mm | 2.400 |
2.400 |
4.220 |
4.220 |
Tilting Depth (D) | mm | 3.000 |
3.000 |
4.665 |
4.655 |
Tilting Height (E) | mm |
3.100 |
3.100 |
3.100 |
3.100 |
Width (F) | mm |
2.200 |
2.200 |
2.200 |
2.200 |