SL Washer Extractors

With a range of four different load sizes, SL model washers based on a simple two-axle fastening and four different drum configurations are high-spin washers without the need for anchors, "floating system" to meet the needs Of each Client.

The minimum separation between the drum and the casing allows faster heating and reduces water consumption.

This type of high-spin washers) reduce residual moisture to the maximum after the washing process, allowing significant savings in the following phases through dryers or calenders. The ease and speed of installation, as well as the minimum space required for its use and maintenance, are a crucial advantage over all other ranges.

Four different drum configurations.
Suspension by airbags.
Speed ​​variator.
Touch screen microprocessor.
Self-positioning of compartments.
Automatic product injection.


    SL-1.1 SL-1.6 SL-2.1 SL-3.0
Capacity Kg / lb 110 / 240
160 / 350
220 / 480  320 / 700 
Drum Diameter mm / in 1170x995 / 46"x39"
46" x 57"
46" x 76"
46" x 110"
Drum Volume Lt / gal 1.070 / 280
1.560 / 412
 2.077 / 550
 3005 / 793
Motor Power Kw 2 x 5,6  2 x 9,3  2 x 11,2  2 x 15 
Motor Power Hp 2 x 7,5  2 x 12,5  2 x 15  2 x 20 
Water Inlet in 2 x 2"
2 x 2" 
2 x 2"
2 x 2"
Drain in 203 / 8"
203 / 8"
203 / 8"
203 / 8"
Steam Inlet in 1"
1 1/4""
1 1/4"
1 1/4"
Compressed Air Inlet in 1/4"
1/4"
1/4"
1/4"
Weight Kg / lb 3.841 / 8.450  4.455 / 9.800  4.900 / 10.800  5.545 / 12.200 
    SL-1.1 SL-1.6 SL-2.1 SL-3.0
Height (A)mm /
in 2.210 / 87"
2.210 / 87"
2.210 / 87"
2.210 / 87"
Depth (B)mm /
in
1.781 / 70"
1.781 / 70"
1.781 / 70"
1.781 / 70"
Width (C)mm /
in 2.291 / 90"
2.756 / 108 " 3.226 / 127"
4.064 / 160"