Speed Washer Extractors

Tupesa has developed a new and complete range of SPEED open-pocket  single-shaft drum centrifuges for ready-made garments that allow both the washing and spinning functionality

Its advanced design and technology, as well as a wide variety of options and accessories, allow a significant impact on energy efficiency and saving water and chemicals, reducing production costs and thus increasing business performance. To give solution to the demand of big loads with a range that includes the models 220, 330 and 400 Kg. / 485,730 and 880 Lb.

Washers of high centrifugation without need of anchors, "floating system".

• Made of stainless steel AISI-304.
• Galvanized steel chassis.
• Programmer for automatic processes.
• Automatic balancing of the machine.
• The drum is located horizontally and door for front loading and unloading.
• Variable speed of rotation with automatic reversal of the direction of rotation.
• Direct steam heating and complete pneumatic valves.
• Tilt forward and back to facilitate loading and unloading.


Additional water inlet.
Acquasoft system: Heat exchanger, circulation pump, filter and modulant valves for bath heating and cooling, 4 tanks of 45 l / 12 gal in stainless steel.
Set of 1 tank in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.  
Set of 2 tanks in stainless steel of 45 lt / 12gal gal with introduction pump and complete pneumatic valves.
Set of 3 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Set of 4 tanks in stainless steel of 45 lt / 12 gal with introduction pump and complete pneumatic valves.
Temperature, time and liters control kit in manual mode.
Steam chamber for indirect heating.
    Speed 150 Speed 220 Speed 400
Speed 500
Capacity kg 150
220
365
460
Drum Diameter mm 1.500 1.500
1.800
1.800
Drum Depth mm 920
1.220
1.424
1.800
Drum Plate Thickness mm 3
3
3
3
Drum Volume lit 1.620
2.150
3.650
4.850
Water Inlet in
2"
2"
2"
2"
Steam Inlet in
3/4" 3/4"
1 1/4"
1 1/4"
Air Inlet in
1/4"
1/4"
1/4"
1/4"
Drain mm 150 150  150
150 
Wash Velocity rpm  4-50 4-50  4-50  4-50 
Centrifuge Speed rpm  4-550 4-550  4-550  4-550 
Motor Power Kw 27.6
27.6
50
50
Motor Power Hp 37
37
70
70
Weight kg 7.000
7.500
10.600
12.700
G Factor G  253 270
321
321
    Speed 150 Speed 220
Speed 400
Speed 500
Height (A) mm 2.460
2.460
2.460
2.460
Depth (B) mm 2.400
2.400
4.220
4.220
Tilting Depth (D) mm 3.000
3.000
4.665
4.655
Tilting Height (E) mm
3.100
3.100
3.100
3.100
Width (F) mm
2.200
2.200
2.200
2.200